preventative maintenance program

How to start a preventive maintenance program

Replace reactive work with proactive work incrementally, one system at a time
Friday, June 27, 2014
By Emma Finch

The question of how to start a preventive maintenance program is extremely common, and for good reason. With budgets tight and workers stretched thin, preventive maintenance has become a nice-to-have instead of a must-have for many organizations. Many operations and maintenance crews find themselves operating in a reactive environment, never knowing what major equipment failure will occur next. It can be daunting for these crews to think about trying to shift to a more proactive workload.

Best practices suggest that 30 per cent of all work should be preventive and 90 per cent of work orders should be generated by preventive maintenance inspections. Sounds good, but again, how does a team move from little to no proactive work to spending nearly a third of its time on proactive work?

First off, be assured that increasing the overall percentage of preventive maintenance is an achievable target for any operations and maintenance team. The key is to transition from short-term fixes to long-term improvements in small increments.

Start by focusing on one mission-critical system, such as the HVAC. Set up maintenance schedules based on manufacturer guidelines and warranty conditions. As a bonus, cleaning and inspecting HVAC equipment’s various parts can reduce the energy costs associated with the system by up to 50 per cent.

Once routine maintenance schedules are established for one system, move on to another critical system, such as the roof. Again, set up maintenance schedules, documenting current conditions for future reference. An effective preventive maintenance program can extend the life of a roof system by years and ensures that, as the roof reaches the end of its life, it can be replaced as a scheduled event rather than in an emergency situation.

Creating schedules for these two systems alone can usually move a workload close to 20 per cent proactive maintenance. Continue on in this way to build preventive maintenance schedules for all systems. Concentrating on one system at a time builds a PM program at a comfortable speed, which allows the team to get used to a certain level of scheduled work before more is introduced. As preventive maintenance schedules are established for each system, reactive work will start to decline as problems that may have cropped up later, in a bigger capacity, are caught early.

Implementing a comprehensive preventive maintenance program takes time, but for those functioning in mostly reactive environments, making small changes means less chaos to deal with on a daily basis and more time to focus on proactive work. Research supports the 80/20 rule in facilities: 80 per cent of a facility’s maintenance issues can be addressed by performing preventive maintenance on only 20 per cent of the facility’s systems, so starting with the major systems can greatly reduce the emergency workload.

Another consideration for a preventive maintenance program is whether a maintenance crew can be dedicated solely to emergency work while the rest of the crews spend their time on proactive activities. It’s common for all technicians to be available to handle reactive work. While that can be a suitable approach, it can also lead to confusion.

A crew may not be prepared for a call when it comes in, or the crew may have to stop work on something that’s more important in the long term but less so in the immediate moment. Think about travel time, too, because that’s one of the biggest drawbacks of a highly reactive work environment: the amount of time spent traveling from one unexpected job to another can end up being significant.

If the maintenance team isn’t big enough to devote multiple people to reactive work, then think about designating one person as the go-to reactive worker so that everyone else can continue on with preventive activities. Team members can take turns serving as the go-to reactive worker so that everyone builds experience with both reactive and proactive maintenance work. The result is a stable schedule for team members doing preventive maintenance that leaves team members available to respond to situations that require immediate attention.

So, how do you implement a preventive maintenance program? One system at a time. It’s a process that starts with small steps and requires consistency and patience. Consider this: studies indicate that 70 to 85 per cent of equipment failures are self-induced, meaning their cause can be traced back to improper maintenance practices.

The benefits of performing regular preventive maintenance so far outweigh the consequences of not doing it that, for an organization to ensure optimal equipment life at minimal cost, it’s absolutely a must-have. A full preventive maintenance program is not beyond the reach of any team. The sooner the process is started, the sooner its benefits can be realized.

Emma Finch is the Local Government Marketing Programs Manager for FacilityDude, based out of Cary, North Carolina. Through interacting with facility professionals all over the U.S. and Canada, she is able to adopt their perspective to understand the daily challenges facing the profession.

2 thoughts on “How to start a preventive maintenance program

  1. I’m a maintenance manager for a 300 member country club. Beyond one housekeeper I am a one man crew. I have so many issues on my plate that I spend the bulk of my time just putting out fires(need at the moment). The result is that many preventive maintenance needs become a break down crisis. I’m responsible for maintaining approx. 40K sq. ft. of space in two buildings. I need help in organizing my facilities maintenance needs so as to get a better handle on maintaining a smooth operation of this facility and servicing the needs of our membership. An operational pegboard would be a good place to start in my mind. Any suggestions or examples would be helpful.

    • You just need to hire a handyman and get all the HVAC units in your properties to be cleaned and checked below:
      -Clean all air filters for inside and outside
      -Check ampere reading of the unit when running and compare to its specified plate on unit
      -Clean and flush out all drain pans for indoor units
      You may have this done during low season when its less busier months of the year.
      Meanwhile keep attending to the fires and spend money based on priority.

Leave a Reply

Your email address will not be published. Required fields are marked *

In our efforts to deter spam comments, please type in the missing part of this simple calculation: *Time limit exceeded. Please complete the captcha once again.