CO detectors considered for code inclusion - REMI Network
REMI
CO detectors considered for code inclusion

CO detectors considered for code inclusion

Tuesday, November 17, 2026

A proposed update to Canada’s model national building code would recognize carbon monoxide (CO) detectors and allow them as an alternative to CO alarms in residential buildings and care facilities. The change, which is now open for public comment, is possible with the advent of the CAN/ULC standard 588 for gas and vapour detectors and sensors, which has recently been adopted as a national standard.

The current model code mandates CO alarms in any residential building or care facility with sleeping rooms that also contains a fuel-burning appliance or storage garage. Those alarms must comply with CAN/CSA standard 6.19 for residential carbon monoxide alarming devices and other specifications for placement, function and integration into each dwelling unit’s electrical system.

An accompanying explanatory summary from the Canadian Board for Harmonized Construction Codes (CBHCC) notes that CO sensors are a pricier but potentially more reliable option that provides real-time monitoring rather than just a responsive signal. Typically, code compliant CO alarms range from $35 to $90 per unit versus $140 to $270 for a CO detector certified to CAN/ULC 588.

As proposed, the code would require the same functionality and placement that applies for CO alarms, but there could also be leeway to integrate additional features, such as heat and smoke sensors and detectors, into the assembly provided those elements adhere to code specifications. That could provide flexibility for a “variety of applications” that might be pertinent for a building’s life safety system.

“The installation and use of CO detectors would enable the monitoring of CO levels in real time, which is an added benefit compared to relying on alarms that sound only when CO levels become unsafe,” the summary states. “This proposed change would improve the reliability, accuracy and system integration of CO detectors while protecting occupants from exposure to hazardous levels of CO.”

If adopted, CO detectors would become a compliance option, not a mandated feature. Technical experts will consider comments collected during the public review before making recommendations to the CBHCC for changes for the next code cycle. Comments can be submitted until Dec. 21, 2026.

Leave a Reply

Your email address will not be published. Required fields are marked *