Articles Archive - Page 609 of 929 - REMINET
REMI

Calgary bylaw change in effect for waste diversion

A bylaw amendment is now in effect requiring Calgary-based facilities to separate yard and food waste from the garbage.

Diversion can include a variety of different measures such as composting, supply management, donation opportunities or anaerobic digestion.

The city will provide education and resources to help businesses get started. Businesses can choose the food and yard waste collection company that best suits their needs and decide how to manage the service. For the full details on this change, see the food and yard waste bylaw requirements page.

Calgary businesses and organizations currently produce one third of all the waste going to city landfills. Of this, 88 per cent isn’t garbage. It includes paper, cardboard, food and other easily divertible materials.

Upcoming changes effective October 2018

Paper and cardboard materials will be banned from City of Calgary landfills as of October1, 2018. The ban applies to all commercial vehicle loads.
If banned material is discovered when the load is being dumped at the face of the landfill, the hauler will pay a higher charge for the entire load. The charge will be significantly more than the designated material rate that is already in place.

Plans also call for increasing landfill fees for food and yard waste. Commercial vehicle loads containing any food and yard waste will be subject to a higher designated materials rate at Calgary landfills to encourage food and yard waste diversion.

Vancouver Trump Tower wins seven global awards

Trump International Hotel & Tower Vancouver has been recognized with seven awards for its outstanding design and construction at the International Property Awards, which celebrate excellence from different regions around the world.

Designed by acclaimed Canadian architect Arthur Erickson, the twisting design of the tower and its timeless elegance convinced 80 judges from around the world to cast their vote for this iconic architectural structure for the Americas Property Awards.

The seven awards for developer Holborn & TA Global were in the following categories:

• Development Marketing Canada
• Best Hotel Architecture Canada (5-star winner)
• Best Hotel Interior Canada (5-star winner)
• Best Residential High-rise Architecture Canada (5-star winner)
• Mixed-use Development Canada
• Best New Hotel Construction & Design Canada (5-star winner)
• Residential High-rise Development Canada

The International Property Awards are one of the most prestigious industry awards in the global real estate industry, with a nearly 30-year history. Applicants from 160 countries participate each year in the hope of having their projects recognized.

“My vision is to build Trump Vancouver as a new symbol for Vancouver that echoes the city as an international gateway city. I am so thrilled this has been implemented perfectly and industry experts from all around the world have recognized the beauty of this building,” said Joo Kim Tiah, principal of Holborn.

Construction started in 2012 and the tower was completed in February 2017. The interior of the hotel was crafted by a world-class, preeminent design team, including Joyce Wang Studio from Hong Kong, who designed the fine-dining Chinese restaurant Mott32; Francois Frossard Design from Miami for Drai’s Vancouver; Burdifilek from Toronto for Trump Champagne Bar, and BOX Interior Design & MCM Interior for Trump Hotel & Residences.

In addition, Holborn and TA were selected as the 5-star winner for four categories to represent Canada and compete against other properties around the world at the Grand Finals of the International Property Awards hosted on December 4th in London, England. The four categories are Best New Hotel Construction & Design Canada, Best Hotel Architecture Canada, Best Hotel Interior Canada and Best Residential High-rise Architecture Canada.

Ontario takes steps to streamline development approvals

Electronic permitting could be coming to Ontario as the province sets about implementing a 14-point action plan aimed at streamlining development approvals.

“By making it easier and faster to build new homes, we’re helping more people find affordable, suitable housing,” said Minister of Housing and Minister Responsible for Poverty Reduction Strategy Peter Milczyn.

The 14-point action plan comes out of a roundtable that brought together government and industry during the summer and fall. Officials at the municipal and provincial levels had seats on the roundtable, as did leaders from the Building Industry and Land Development Association (BILD), Ontario Home Builders’ Association (OHBA) and Residential Construction Council of Ontario (RESCON).

“The Development Approvals Roundtable has given us an action plan for streamlining the development approvals process, bringing housing to market sooner, and supporting provincial and municipal priorities for land use and infrastructure planning,” said Minister of Municipal Affairs Bill Mauro.

In addition to recommending looking into electronic permitting, the action plan, released Nov. 8, calls on the Ministry of Municipal Affairs and Housing to promote progressive zoning.

The province is expected to regularly update the roundtable on the status of the action plan items starting in the spring.

Guide for NLT design and construction a first

A new comprehensive guide on Nail-Laminated Timber (NLT) with detailed expert advice is now available for Canada’s design and construction community.

Nail-Laminated Timber (NLT) Canadian Design and Construction Guide, the first manual of its kind, combines design, construction, and fabrication expertise from built projects into an easy to use reference.

Co-edited by architecture firm Perkins+Will and structural engineering firm Fast + Epp, the free guide provides inspiration and direction to ensure safe, predictable and economical use of NLT, including practical strategies and guidance with lessons learned. This same team produced a similar guide for the U.S. building industry earlier this year.

NLT is created by fastening individual dimensional lumber, stacked on edge, into one structural element with nails. In addition to being used in floors, decks and roofs, nail-lam panels have been used for timber elevator and stair shafts.

While Canada is a leader in NLT use and home to an array of innovative real-life projects ranging from schools and health facilities to commercial buildings and transportation infrastructure, available informational resources are dated and scarce.

“This guide serves as a supplement to best practices and standards in wood design and construction, and is meant to offer guidance specific to the application of NLT for the range of disciplines engaged in both design and construction,” Rebecca Holt, sustainable building advisor at Perkins+Will.

Unlike other mass timber products, NLT does not require a unique manufacturing facility and can be fabricated with local dimension lumber for use in applications across sectors and building types. It is a cost-effective solution allowing projects to leverage the economic and environmental benefits of mass timber construction.

Consistent with current codes and standards, the guide focuses on design and construction considerations for floor and roof systems pertaining to Canadian construction practice and standards. Included in the code through provisions for combustible construction and heavy timber, NLT can be incorporated into a project without the need for an alternative solution application. NLT offers design flexibility and is readily accessible across the country thanks to the availability of raw materials and ease of fabrication.

“Mass timber technologies like NLT signify an exciting shift in the way we think about building,” said Tanya Luthi of Fast + Epp. “There is an eagerness among architects and building owners that we haven’t seen for a number of years, and structural engineers like myself can use a resource like this to help bring the designers’ vision to life in a safe, economical way.”

Available for free download at naturallywood.com, the guide was authored by a team of skilled practitioners dedicated to advancing high-quality timber construction across industries, typologies, and geographies.

The guide was made possible by leadership and support from Forestry Innovation Investment and the Binational Softwood Lumber Council, as well as expertise from Perkins+Will, Fast + Epp, StructureCraft, Seagate Structures Ltd., RDH Building Science, GHL Consultants Ltd., Holmes Fire, RWDI Consulting Engineers and Scientists, the Canadian Wood Council and FPInnovations.

Additional mass timber and wood building resources are available at naturallywood.com and reThinkWood.com.

Workplace harassment not limited to Hollywood

Hollywood is not the only workplace rife with harassment. Condo communities, with their complicated ecosystems of residents, employees, third-party service providers and suppliers, are regularly the scenes of inappropriate behaviour.

Consider the cleaner who stays awake at night worrying about the manager who comments on her physical appearance and massages her shoulders while she’s alone in the lunchroom. Or the manager who considers quitting under the stress of being micro-managed by one of his directors. Or the security guard who becomes ashamed to speak aloud because of the way some owners criticize her accented English.

These are all fictional but realistic accounts of on-the-job abuse raised earlier this month in the Condo Conference session Harassment: Up Close and Personal! The discussion comes as accusations of inappropriate behaviour by Hollywood heavyweights mount, reaching a critical mass whereby these reports are having real consequences for the careers of alleged perpetrators.

With victims finding the courage to come forward with their stories, cultural attitudes are shifting such that workplace harassment is becoming impossible to ignore, including in condo communities, which have duties to address accusations of inappropriate behaviour.

“Oftentimes our clients and residents do not consider themselves to be part of someone’s workplace — and that’s a natural assumption for them, because they’re at home — but it’s our workplace,” observed moderator Catherine Murdock, district manager at Del Property Management. “If an employee comes to you from any of your contractual sources — housekeeping, security, management, grounds-keeping — and they need to report abuse, please take them seriously.”

Courts weigh in on workplace harassment

Harassment is generally repetitive, unwelcome behaviour — physical, verbal or written — that creates discomfort. In condo communities, an act such as sending a series of emails making valid complaints can be acceptable or unacceptable, depending on how it’s carried out, said Patrick Greco, partner at Shibley Righton LLP.

Greco cited the case of York Condominium Corporation No. 163 v. Robinson, in which he served as counsel for the applicant, as an example. In a decision issued this spring, a judge ordered the respondent owner to stop her harassing behaviour and awarded $15,000 in costs to the applicant condo corporation. The behaviour in question included firing off missives that, in addition to expressing concerns about building maintenance, body-shamed the office manager.

“An owner has the right to make inquiries, an owner even has the right to criticize maintenance — they’re owners, they have a stake in this — but they can’t turn it into something personal that degrades, humiliates and harasses an individual on a property,” said Greco.

The decision in the Robinson case was based on provisions of the Condominium Act, which prohibits conduct on the common elements and in units that could harm a person; the Occupational Health and Safety Act, which prohibits workplace harassment; and the rules of the condo corporation.

Months earlier, the judge in Toronto Standard Condominium Corporation No. 2395 v. Wong relied on some of the same legislative provisions in issuing a similar compliance order, but not before one of the corporation’s employees subject to workplace harassment requested a transfer. The key difference in the Wong case was that the owner’s behaviour was erratic rather than intentional, said Greco, prompting counsel for the corporation to ask whether a mental examination was warranted.

The condo lawyer advocated taking a proactive approach to allegations of workplace harassment, carefully documenting any evidence along the way in case it’s needed later, so as to prevent these situations from escalating to the point where court intervention is required.

Policies provide framework for investigations

Following up on accusations of inappropriate behaviour is about managing risk, said condo lawyer Patricia Elia, of Elia Associates, which means mapping out under what circumstances the condo corporation will intervene. As examples, she said corporations should avoid taking on responsibilities that rightfully belong to other parties, such as contractors, and parties to shared facilities should hash out how liability for conduct that occurs on common property will be apportioned.

The details of how a condo corporation will address allegations should be captured in workplace harassment and violence policies, which changes to the Occupational Health and Safety Act made mandatory for employers close to a decade ago. These policies should define what constitutes inappropriate behaviour and provide for anonymous reporting and expeditious investigation, said Elia.

Directors can be guilty of workplace harassment, so they should establish rules governing how they comport themselves, too, whether that takes the form of a code of conduct or code of ethics.

“I’ve had cases where a director is harassing a property manager,” said Elia. “The property manager responds and reports this issue to their property management team; their bosses say to the corporation client, ‘If you don’t fix this, we’re going to sue the corporation.’”

In addition to defining what constitutes inappropriate behaviour, the condo lawyer recommended having a policy in place to affirm the community’s commitment to respecting human rights, which it has a duty to do under the law anyway. Information management policies likewise support workplace harassment and violence policies by setting out how the corporation will handle confidential data, such as in cases where questions of mental competency arise.

The investigation itself involves reviewing the incident, or incidents, in question, which may include interviewing the alleged perpetrator and victim as well as any witnesses. It’s important to be objective in posing questions, Elia cautioned, and the investigation ultimately needs to produce findings and resulting actions.

New legislation recognizes roadblocks to reporting

An investigation into workplace harassment can only occur if the inappropriate behaviour gets reported, and there are many reasons why victims may be reluctant to bring forward complaints.

“They don’t get reported because the fear of reprisal, of being labeled a trouble-maker, possibly losing your job,” said Murdock. “Or, in a very strange situation, if you have a very strong case, the fact that you may be given a promotion and asked to sign a gag order so it doesn’t get reported and nothing ever happens.”

Non-retaliation policies are one way condo corporations can remove barriers to reporting inappropriate behaviour in the workplace.

Last year, the Ontario government passed the Sexual Violence and Harassment Action Plan Act, which relaxed, and in some cases scrapped, legislated deadlines for bringing forward complaints.

“This is very important in recognizing the level of trauma that people actually go through when they are sexually and violently harassed or assaulted,” said Elia. “It takes time to heal, and even to have the courage to actually stand up for you own rights to find your voice.”

Discourse in condo communities demands rethink

Greco suggested that, more broadly, the current level of discourse in condo communities needs to be raised. He pointed to the refrain he often hears at raucous owners’ meetings — the corporation is compensating him handsomely — the implication being that he should just absorb the abuse.

“At the end, I get in my car, play some Metallica … and by the time I get home, I don’t have to go back to the building for a year,” said Greco. “It’s not the same for a cleaner or a manager going back to that the very next day.”

Michelle Ervin is the editor of CondoBusiness.

Retrofitting with Triple-Glazed Windows

Proposed changes to the Ontario Building Code in 2019 and 2022 will require the use of more energy efficient building products, such as windows, in an effort to meet tighter energy requirements laid out in the provincial government’s Climate Change Strategy.

As it stands, the industry norm is to use double-glazed windows of varying frame types, configurations and styles to meet current energy efficiency requirements along with other requirements for use and safety. However, double-glazed windows may not be able to meet these new efficiency requirements, paving the way for wider acceptance of triple-glazed windows.

Improving the efficiency of older buildings is an important consideration, and the tightening of building envelopes during renovation or retrofit work is generally viewed as a good thing from both an energy efficiency and financial perspective. In most cases, windows are the weakest link in terms of thermal efficiency of a wall assembly, which forms part of the building envelope. In both older mid- and high-rise residential buildings, such as condominiums, replacing conventional double-glazed “punch-style” windows with triple-glazed units can improve various aspects of the building envelope’s performance.

Triple-Glazed Benefits

Triple-glazed windows can improve resistance to heat-loss during colder temperatures in winter months and resistance to heat-gain during warmer temperatures in summer months. They can also reduce sound transmission and, most importantly, the common occurrence of condensation development on the interior glass surface when outdoor temperatures are colder.

triple-glazed windows

Typical cross-section of one style of triple-glazed window.

Solid or opaque wall areas will typically have lower heat loss and heat gain characteristics than glazed areas where windows are located. This is mainly due to the materials that are used to construct various building components and assemblies where the thermal resistance characteristics of items, such as wall insulation, will be significantly higher than a glazed window unit.

However, overall energy efficiency can be significantly improved by adding additional panes of glass, along with treatments to the glass surfaces, such as a low-e coating (low thermal emissivity) and adding inert gases (argon or krypton, for example) to the spaces between the individual pieces of glass in a window assembly.

Depending on the manufacturer, materials used and other considerations, windows utilizing triple-glazing can improve their estimated energy rating from five per cent to 35 per cent over conventional low-efficient double-glazed windows, which would likely have been installed during the original construction of most residential buildings.

Consider Condensation

The development of condensation on the interior surface of a window when outside temperatures are colder can occur multiple times in residential suites during the heating season. The continuous presence of moisture can cause physical damage and deterioration to the materials directly below the glazed areas where condensation is occurring, especially if the materials are porous or prone to water damage.

Photo one: typical double-glazed, aluminum-framed window in condo high-rise suite, exhibiting condensation during cooler outside temperatures. Photo two: resultant interior finish damage to on-going condensation formation on interior of window in condo high-rise suite. Photo three: severe condensation and frost build-up on inner glass surface. Physical damage to wood-frame occurring.

Photo One: typical double-glazed, aluminum-framed window in condo high-rise suite, exhibiting condensation during cooler outside temperatures. Photo Two: resultant interior finish damage to on-going condensation formation on interior of window in condo high-rise suite. Photo Three: severe condensation and frost build-up on inner glass surface. Physical damage to wood-frame occurring.

Simple issues of finish deterioration, such as paint peeling, can be minor in nature compared to more complex and significant issues, such as structural damage to building assemblies and components and the development of mould.

Although mould and bacteria are present in the air we breathe every day, exposure to higher concentrations in enclosed spaces, like condominium suites or individual rooms, can cause health problems for individuals with a sensitivity to mould.

Determine the Source

Other factors contributing to or expanding the formation of condensation on the interior surfaces of windows include living habits, inadequate interior ventilation, changing the use of a space from its original design purpose and tightening the exterior building envelope during renovation work. Any of these individual items or a combination may already be causing a condensation problem on interior window surfaces or have increased the occurrences.

An investigation should always be performed to determine the source of the re-occurring condensation and if there are any other causative factors, such as water leaking through the exterior building envelope. This should be ruled out before time and money are spent on replacing or upgrading windows, which may not address the source of the problem.

If window replacement is being planned or considered in a building, upgrading to triple-glazed windows should be seriously considered to improve thermal comfort and indoor air quality, save energy and reduce costs. Long-term planning within a condominium’s reserve fund may allow for flexibility or provide additional options when the time comes for window replacement.

LosakJohn Losak, B.Tech. (Arch.Sc.), MAATO, CRP, BCQ, is principal of Kasol Building Sciences Ltd.  He is formally trained in building science and has over twenty-seven years of experience in the building consulting industry, along with being a certified reserve fund planner and building code qualified.

Kasol logo

 

The Grange meets new backup power guidelines in Toronto first

The City of Toronto today acknowledged the Grange condo as the first multi-residential building to meet its new guidelines for backup power, Magnolia Generation reported in a press release.

The voluntary standards call for sustained occupancy, or the ability for multi-residential buildings residents to comfortably stay put for up to three days when the power gets knocked out for a period of time, as in the 2013 ice storm. That compares with minimum life-safety requirements for emergency power, which are designed primarily to evacuate residents. For example, minimum life-safety requirements mandate that one elevator be backed up with emergency power for firefighter use, whereas the new guidelines recommend that at least one other elevator be backed up for resident use.

“With more and more Torontonians living in tall buildings, and more frequent and severe climate events expected, improving backup power in multi-unit residential buildings serves to strengthen the city’s overall resilience by allowing people to remain in the buildings during prolonged power outages,” Fernando Carou, senior engineer for the City’s community energy planning, said in the press release.

The Grange achieved sustained occupancy by switching to a Combined Heat and emergency Power (CHeP) system when its backup generator reached the end of its service life. Designed and built by Magnolia Generation, the solution satisfies most of the day-to-day energy needs of the building, while producing four fewer tonnes of greenhouse gasses per year, using natural gas-powered turbines.

The Grange avoided upfront capital costs through an agreement with that will see the condo pay the going rate for gas and electricity for the next two decades as Magnolia Generation owns, operates and maintains the CHeP system to supply the condo with energy. An incentive under the Ontario Long Term Energy Plan designed to encourage uptake of CHeP is set to expire on July 1, 2018.

Magnolia Generation developed the solution for the Grange in collaboration with its management services provider, Crossbridge Condominium Services (formerly known as Brookfield).

“Magnolia Generation came to us several years ago proposing to introduce co-generation into condominiums,” Rob Detta Colli, manager of energy and sustainability for Crossbridge Condominium Services, said in the press release. “They leveraged our knowledge of the industry, and worked to create a product that is now setting a new standard for the multi-unit residential segment in Ontario.”

Others are following the Grange’s cue, with the Toronto Community Housing Corporation due to adopt a CHeP system, currently in design by Magnolia Generation, at one of its buildings.

Facilities urged to properly dispose of fats, oils, grease

Compared to residential units, industrial, commercial and institutional (ICI) facilities often discharge larger amounts of fats, oils and grease (FOG) into the sanitary sewer, causing problems internally and for the surrounding municipality.

When FOG is poured down the drain it accumulates in the pipes and eventually cools and hardens, decreasing capacity and causing potential blockages in pipes and sewers. Examples of FOG include meat fat, cooking oil, butter and margarine, dairy and sauces.

“Blocked pipes can back up into the facility or cause overflows outside,” cautions Mark Payne, program manager of monitoring and enforcement for the Regional Municipality of York. “Overflows and backups cause health concerns, environmental issues and property damage. Cleaning and clearing blockages and replacing any damaged infrastructure is costly. Legal action may be taken if municipal infrastructure is affected or if an ICI discharges wastewater exceeding local bylaws.”

Canadian municipalities currently spend more than $250 million a year removing garbage from sewer systems, according to the Municipal Enforcement Sewer Use Group. Cities require that commercial facilities help keep sanitary sewers from clogging with FOG.

“In York Region, for example, all ICIs whose site contains a restaurant or where food is cooked, processed or prepared must also install, operate and maintain a grease interceptor,” says Payne.

York Region is one of the municipal partners of the I Don’t Flush public awareness campaign, which encourages the proper disposal of FOG. The campaign is a joint effort of the Ontario Clean Water Agency and the Clean Water Foundation, also in partnership with the City of Barrie, Town of Bradford West Gwillimbury, Niagara Region and Town of LaSalle.

Here are five steps facilities can take to prevent FOG from going down the drain:

  • Place screens over drains to prevent solid food particles from entering.
  • Recycle FOG. Many companies provide bins and pickup services then recycle FOG into animal feed or biodiesel.
  • Wipe or scrape grease from dishes and pots and place it in the organic bin or waste prior to washing.
  • Train staff and place reminder signs that “No Grease” goes down the drain.
  • Don’t use enzymes, bacteria, solvents, hot water or other chemicals to facilitate the passage of FOG through interceptors.  Not only is it illegal to do so, but it also pushes the problem into the sewer infrastructure.

 

Facility Floor Maintenance: Tips and Tools

Facility management professionals are faced with daily decisions on building maintenance, cleanliness, staff and operating costs. In that mix of responsibilities is implementing a floor care program that protects your floor investment and bottom line. The most efficient way to maintain the look of any finished floor is by adopting and following a regular maintenance schedule and using products that require the least amount of labour.

Shiny floors are literally a reflection of your business. It’s been shown that facility appearance ratings can drop by as much as 75 per cent if floor shine makes a bad first impression.

The following best practices offer solutions to help keep your floors shiny and contribute to a great first impression:

Prevention

In an average 22 day work month, more than 26 pounds of dirt can be tracked into a facility by 1,000 people moving through an entrance. By putting a floor matting program into place, you can help reduce the amount of soil, dirt and moisture that enters the building.

Mats should be located inside and outside the building in high-traffic areas, such as the main entrance, the entryway and foyer. Also, place mats throughout the building – near the steps, the elevator shaft or other strategic areas – to continue to capture incoming dirt. Remember to clean mats on a regular basis.

Daily Routine and Maintenance

Your daily routine and maintenance schedule should include the following steps, depending on your facility and equipment. Maintaining a clean floor on a regular basis is an easy way to achieve efficiency: it can allow you to delay stripping and refinishing indefinitely.

Dust Mopping: Always begin a daily routine with dust mopping to help clear away larger elements of surface dirt. Dust mopping will help remove the surface dirt so that it doesn’t become embedded into the finish, causing damage to the finish. Don’t use oil-based dust mop treatments as they can leave a haze on the floor that then attracts even more dirt. For best results, make sure the mop is clean right from the start.

Damp Mopping: Damp mopping helps remove more particulates as well as oily soil. It also prevents the floor’s finish from darkening or yellowing from embedded soil. Be sure to use a clean mop head, start with clean water and follow the manufacturer’s recommended dilution ratio for the floor cleaning product. And, be wary of overly wet mops. These can leave floors too wet with the cleaner, leaving soil behind, too. Finally, some products recommend rinsing with clean water. Consider using a no-rinse cleaner, which may help improve efficiency by eliminating that extra rinse step.

Auto Scrubbing: This may not be feasible for all facilities, but using this type of equipment can be more effective and efficient. It removes soil better than damp mopping and can use less chemicals. Don’t forget to follow the manufacturer’s recommended dilution and choose the appropriate pad for cleaning.

Low Speed Buffing: Low speed buffing helps repair the finish to a smooth shine and delay the need for a recoat. It’s a great option if your budget doesn’t allow for a burnisher. For durable finishes use a spray buff to aid repair, a mop-on maintainer for efficiency and choose the pad appropriate for spray buffing. Also, remember to properly clean floors first before buffing. Dirt left on the floor can get embedded into the finish by the buffer pad if not cleaned away first.

High Speed Burnishing: High speed burnishing is much more efficient than low speed buffing, as these machines tend to have higher rotation speeds and rougher pads. High speed burnishing also helps repair the finish to a smooth shine and delays the need for a recoat. If you do plan on burnishing, you’ll first want to select a floor finish that matches your burnish frequency, and then choose the appropriate burnishing pad.

Importantly, the frequency of buffing or burnishing is contingent on your floor type and your desired maintenance level. A critical decision to make is choosing the right finish up front to match the desired level of maintenance and care. Each and every finish is formulated with a different burnish response and end result.

banner (002)

Interim Maintenance

When buffing or burnishing no longer helps provide the floor shine you want, it may be time for some interim maintenance. This step involves a deep scrub and recoat. It’s easiest to use an autoscrubber to achieve a good deep scrub and remove soil build-up, and then follow with a fresh water rinse. Follow the manufacturer’s instructions to achieve best results. After the deep scrub, apply three to five thin layers of protective finish for the recoat. Thin, even coats enable proper finish formation, greater strength and improved durability. The frequency of recoating is dependent on the amount of foot traffic and also the amount of routine maintenance you are able to perform.

Restorative Care

Why strip and refinish? Floor finishes tend to become darkened and yellowed over time despite proper routine maintenance, so it is important to periodically strip off the old finish and apply a fresh finish. Choose an appropriate finished floor stripper product and follow the manufacturer’s directions carefully, including specific product application and wait time.

High efficiency tip: let the product do the work for you. Following the manufacturer’s suggested wait time will ensure the best results. The right stripper should remove the finish completely the first time, eliminating the need for re-stripping areas to achieve a clean base for the new finish. To maximize productivity, choose a no-rinse, low-odour and butyl-free stripper that can be used safely in any facility, especially those that operate 24/7. After ensuring the old finish is completely removed, it’s time to apply the new finish.

Critical Decisions

Selecting the best finish requires a thorough understanding of both your facility’s needs and the product’s features. Consider first how much routine maintenance you are able to provide, including buffing or burnishing. Then consider the importance of your floor shine levels. For example, durable finishes often stand up well to scuffs, scratches and heel marks, and have a higher wear resistance. However, they have a lower burnish response and may not have high levels of shine. Burnishable finishes, on the other hand, are designed for polishing. They can provide higher levels of shine, but require a bit more maintenance to keep that shine.

In addition, selecting the right cleaning products will allow cleaning professionals to achieve the best results. When ineffective cleaners are used, soils are left behind, which cause dulling or wear on floor surfaces. The use of less effective products also negatively impacts productivity because staff must clean longer and it’s harder to attain the desired result. The smarter choice is the use of a neutral-impact cleaner that is highly effective in removing a broad range of abrasive particulate soil from the floor surface. The right cleaner will enable staff to more easily achieve soil removal and help maintain a bright and shiny appearance for the floor.

Facility managers should consider an end-to-end maintenance solution, such as the P&G Pro Line Floor Care System, that ensures the stripper, finish and cleaner are formulated to work seamlessly together to deliver long-lasting shine, while helping to extend the time between scrub and recoat.

Flooring and floor care maintenance are major investments for any business. Be sure to choose a floor care system that works synergistically, gives a great first impression to patrons and visitors and extends the life of the floor itself.

For more information, please visit www.pgpro.ca.

Joe Davis is a Senior Account Executive at P&G Professional, with a focus on floorcare and janitorial.

pgprofessional

Jason Henderson is new CEO of SICA in B.C.

The Southern Interior Construction Association (SICA) in B.C. has announced that Jason Henderson is its new CEO.

Henderson assumes the position after serving on the SICA board for the last six years, including three years as a director on the BC Construction Association board. He began his career in construction as an apprentice electrician, working his way up to management. The association’s board of directors feel Henderson’s 22 years of experience in the construction industry will be a considerable asset to SICA.

With a leadership style that focuses on innovation and collaboration, Henderson is passionate about moving SICA forward and working with stakeholders as the construction industry continues to evolve. SICA looks forward to having their new CEO traveling the region and engaging with current and potential members.

“The SICA Hiring Committee was tasked with finding the candidate best suited to take SICA into its next phase. After an extensive search with many qualified candidates we are pleased to have Jason accept our top position of CEO,” said SICA’s past chair Debra Dotschkat in the announcement. “We have complete confidence in Jason and know he has the industry knowledge and passion for this role. We look forward to SICA’s bright future.”

Founded in 1969, the association has offices in Kelowna and Kamloops as well as a Construction Training Centre in Kelowna.

Kryton International acquires Cementec Industries

Vancouver-based Kryton International Inc. has acquired Calgary-based Cementec Industries Inc., a manufacturer of concrete additive solutions for the construction, oil and gas industries.

Kryton specializes in crystalline concrete waterproofing and this acquisition will complement the company’s existing lineup of Smart Concrete waterproofing solutions.

Hard-Cem, the integral concrete hardening admixture developed by Cementec, provides concrete with resistance to abrasion and erosion. With this admixture, concrete floors and infrastructure last up to six times longer than untreated concrete. As a result, costly repairs and the inconvenience of shutdowns can be avoided.

“The breakthrough concrete solutions developed by Cementec are technically superior and innovative. Not only do they increase infrastructure’s service life and eliminate exposure to harmful dust, Hard-Cem removes quality control issues and provides increased design flexibility. This will bring greater value to our customers,” says Kari Yuers, CEO of Kryton.

Cementec also manufactures Silica Fume products that are used to densify and strengthen concrete. These Cementec solutions can be used in conjunction with Kryton’s Krystol Internal Membrane system.

“Hard-Cem and Silica Fume will extend our product offerings in integral concrete durability, erosion and abrasion protection. We intend to be a go-to solutions provider to an industry that is increasingly concerned about protecting and extending the lifespan of concrete structures,” adds Kevin Yuers, vice-president of product development at Kryton.

Kryton International Inc. is the inventor of the crystalline waterproofing admixture and has been waterproofing concrete structures with its proprietary Krystol technology since 1973. It exports its products to more than 50 countries globally.

Apartment units led year-over-year price gains in October

Apartment units continued to lead year-over-year price gains in October, the Canadian Real Estate Association (CREA) reported last week. Apartment units saw their prices surge 20 per cent above October 2016 levels, compared to the 13.2-per-cent increase observed for townhouse/row units and the 6.3-per-cent and 5.8-per-cent increases observed for one-storey single-family homes and two-storey single-family homes, respectively.

The MLS® Home Price Index, which controls for month-to-month shifts in the mix of the types of homes sold, was up 9.7 per cent in October, continuing a year-over-year deceleration in gains that began in April. CREA pointed to housing markets in the Greater Golden Horseshoe as the main culprit behind the deceleration in gains, citing the softening price trends there.

The slowdown in price gains persisted as national home sales inched up close to one per cent month over month in October, which built on August and September’s month-over-month increases. At the same time, national home sales dipped 4.3 per cent year over year in October, marking the seventh straight month of actual activity to fall short of 2016 levels. October home sales in the GTA reflected both of these national trends, recording a month-over-month uptick while activity remained below 2016 levels.

“National sales momentum is positive heading toward year-end,” said Gregory Klump, chief economist at CREA. “It remains to be seen whether that momentum can continue once the recently announced stress test takes effect beginning on New Year’s Day.”

“The stress test is designed to curtail growth in mortgage debt,” Klump explained. “If it works as intended, Canadian economic growth may slow by more than currently expected.”

Calgary, Greater Vancouver and London-St. Thomas, which saw their new listings pull back last month, put a drag on national new listings, which, after rising more than five per cent in September, posted a 0.8-per-cent uptick in October.

The slight increase in activity and slowdown in supply nudged the national sales-to-new listings ratio closer to sellers’ market territory, up to 56.7 per cent in October from 55.7 per cent in September. The ratio remained within the 40 to 60-per-cent range generally deemed to represent a balanced housing market, but only 60 per cent of local markets could claim this condition upon measuring the sales-to-new listings ratio against their long-term average.

National inventory has stayed static since August, hovering near the long-term average, with five months’ worth in October. Although the Greater Golden Horseshoe has yet to return to its long-term average of 3.1 months of inventory, the region has rebounded from a record low of 0.8 months of inventory in February and March to 2.5 months of inventory in October.

Most of the 13 markets captured in the MLS® Home Price Index saw their benchmark home prices rise year over year last month. Benchmark home prices were up 12.4 per cent year over year in October in Greater Vancouver and 17. 3 per cent in Fraser Valley. At the same time, Greater Toronto, Oakville-Milton and Guelph posted year-over-year price gains of 9.7 per cent, 8.3 per cent and 13.2 per cent, respectively.

The actual national average home price rose five per cent year over year in October, surpassing the half-a-million-dollar mark at $506,000. But that figure is distorted to the tune of more than $120,000 by Canada’s two hottest housing markets. When Greater Toronto and Greater Vancouver are excluded, the national average home price drops to $383,000.

Stantec Tower celebrates topping off milestone

Stantec Tower celebrated its latest construction milestone with the official topping off of the commercial level on November 17. After 18 months of planning, the two-metre commercial level pour is complete – a process requiring a 30-hour continuous pour.

Located on the corner of 102 Street and 103 Ave in Edmonton, the mixed-use skyscraper is currently under construction in the Ice District in downtown Edmonton.

Once complete, the much-anticipated high-rise will be the tallest building in western Canada, introducing another construction ‘first’ for Edmonton. Stantec Tower is the first in the city to incorporate an above ground transfer slab, stabilizing the building with 1,580,000 pounds of reinforced steel. With the enormity of the structure, the building also requires four-500,000-pound structural steel outriggers (trusses) to engage exterior columns for further stabilization. The tower is currently at half its height, and will stand 251 metres tall when complete.

“This commercial level topping-off is an important milestone that recognizes the extensive work and meticulous planning that has gone into Stantec Tower,” said Glen Scott, president of Katz Group Real Estate. “It is an honour to be a part of a project that will shape the city of Edmonton and be an exemplary contribution to Edmonton’s skyline.”

Stantec Tower will be home to commercial development and mixed-use workplaces, multi-family residences and retail space. SKY Residences condominiums will stand atop the commercial level to complete the remaining 37 floors of the tower.

“The topping off is a significant milestone for both Stantec and ICE District,” said Gord Johnston, incoming chief executive officer, Stantec. “This pour, at the 30th storey, represents a feat of engineering and architecture. Stantec’s roots are firmly planted in Edmonton and we look forward to moving into our new home next year.”

Expected completion of Stantec Tower is 2018 with Stantec Inc. to be one of the first residents in the building. SKY Residences will be ready for occupancy in 2019. The tower is more than 90 per cent leased.

 

Northview Apartment REIT acquires 1,250 units

Northview Apartment REIT announced it has agreed to acquire a 1,250-unit portfolio from independent third-party vendors and affiliates of Starlight Group Property Holdings Inc. for an aggregate purchase price of $196.8 million, with a weighted average capitalization rate of 4.4%.

In addition, Northview has agreed to sell a 216-unit non-core asset located in Kitchener, ON, for $37.7 million. Following these transactions, which are expected to close in early December 2017, Northview’s multifamily portfolio will increase to over 25,000 units.

“These transactions represent continued progress to our 2017 strategic priorities supporting the strategic capital redeployment and non-core asset sales,” commented Todd Cook, President and CEO. “These high-quality assets are located in strong markets with an average occupancy level of 97.5%. It will further improve the overall geographic diversification and quality of our portfolio with a meaningful increase in the Ontario portfolio. This transaction also increases strong organic growth opportunities for our proven high-end renovation program.”

In total, Northview is buying 10 properties in four provinces, several of which were operated by Timbercreek Communities. The properties include:

  • 2837 Yonge Street in Toronto, the Metropolitan Apartments, 67 units;
  • 320-342 Avenue Road in Toronto, 109 units;
  • 2920 Fairlea Crescent in Ottawa, 113 units;
  • 340 Colborne Street in London, 132 units;
  • 204 Hespeler Road in Cambridge, 146 units;
  • 24-28 Helen Avenue in Brantford, 284 units;
  • 939-959 Boulevard de la Cote Vertu in Saint Laurent, Que., 89 units;
  • 105 Milton Street in Montreal, 112 units;
  • 7840 Lochside Drive in Saanichton, B.C., 126 units;
  • 9-54 Paige Plaza in Lower Sackville, N.S., 72 units.

“The acquisition is expected to be leverage neutral following future non-core asset sales,” Cook concluded. In an extremely competitive market landscape, these off-market transactions demonstrate the benefits of Northview’s strategic relationship with Starlight and our continued focus on driving sustainable value creation for Unitholders.”

Funding for the purchases will be through $121.9 million of insured mortgage debt, the issuance of $52 million in shares to the vendors and $22.9 million in cash funded by its existing credit facilities and proceeds from the Kitchener sale.

 

New tools to handle infectious disease outbreaks

As flu season kicks off, the Canadian Centre for Occupational Health and Safety (CCOHS) has released a microsite full of tools and resources to help workplaces and communities minimize the impact of flu and infectious disease outbreaks.

The Flu and Infectious Disease Outbreaks site provides information, tips and resources intended to help keep workplaces operational and people healthy, working and thriving during a widespread flu outbreak or a pandemic.

The mobile-friendly website acts as a gateway to information from credible sources across Canada on topics such as business continuity planning, infection prevention and control and personal protective equipment.

“The time to start thinking about and preparing for a flu outbreak is now, before flu season kicks into high gear,” said Gareth Jones, acting president and CEO at CCOHS. “And in turning our attention to the flu season, we should also remind ourselves of the importance of building contingency plans that maintain business continuity should employees become ill and have to remain at home.”

The Flu and Infectious Disease Outbreaks website can be found at www.ccohs.ca/outbreaks.

Survey reveals annoying office kitchen habits

A recent survey suggests poor etiquette in shared office kitchens may be causing discord among Canadian coworkers. Two-thirds (67 per cent) of respondents stated they would have negative feelings toward a co-worker if they believed they didn’t contribute to keeping the office kitchen clean.

More than 1,000 Canadian office workers surveyed by Angus Reid Forum on behalf of Rubbermaid found that the most annoying office behaviour is leaving a splattered microwave (37 per cent), followed by dishes piled in the sink instead of being put in the dishwasher (28 per cent), and coworkers heating up or eating foods with strong odours (21 per cent).

Nearly two-thirds of respondents (62 per cent) believe that men leave the most mess in the office kitchen. Junior employees and interns are also being blamed, with 65 per cent and 56 per cent of respondents respectively citing them as the mess-makers. When asked whether they themselves have left a mess without tidying up after themselves, only one in 10 respondents (6 per cent) admitted they had.

Most people never contront a co-worker about leave a messy kitchen and only 15 per cent have directly spoken to the person they believe committed a kitchen faux-pas

Other tactics used by workers to address a colleague include leaving a note posted in the kitchen, sending an all-staff email and hoping the intended recipient gets the message, leaving the suspected colleague an anonymous post-it note on their desk and telling their boss or manager.

Other survey stats show 44 per cent of Canadians who work in offices with shared kitchens bring their lunch to work every day.

Sidewalk Toronto reimagines the waterfront

Building on the city’s tech boom to create new economic opportunity, Sidewalk Labs and Waterfront Toronto have come together to launch a technological testbed, known as Sidewalk Toronto. Blending cutting-edge, digital technology with human-centred urban design, Sidewalk Toronto’s goal is to create modern, mixed-use communities that are connected, sustainable and affordable.

What began in March, 2017 with a Request for Proposals (RFP) by Waterfront Toronto seeking a partner for the new Quayside development district, has since blossomed into a progressive alliance with potential global impacts. All eyes are on this new partnership as it forges the path to urban innovation and sets out to transform the city’s derelict, post-industrial waterfront into a leading-edge community where data captures all, and progressive minds seek perpetual change for the better.

“Waterfront Toronto has already made remarkable strides in revitalizing the waterfront with forward-looking new neighbourhoods and reconnecting Torontonians to their waterfront,” said Will Fleissig, President and CEO of Waterfront Toronto, at the press announcement in October. “Today, we are expanding our know-how by partnering with Sidewalk Labs to create a progressive, innovative community; one that addresses significant challenges and sets new standards around sustainability, affordable housing and community engagement.”

On November 1st, a Town Hall meeting kicked off planning efforts with discussions centred on finding ways to improve infrastructure and transportation systems, create new models of affordable housing and flexible retail uses, and establish clear governance policies related to data protection and privacy. Ultimately, what’s gleaned from these year-long forums and public conversations will culminate in a Master Innovation and Development Plan that, if adopted, will form the basis for the Quayside development and any subsequent revitalization of City-owned lands in the eastern waterfront.

With public engagement and stakeholder consultation at the heart of everything it does, Sidewalk Toronto’s mandate is to develop the eastern waterfront into a new type of community that combines the best in urban design with the latest in digital technology. By learning from data and adapting from cumulative lessons learned, it will address some of the biggest challenges facing today’s cities, including: energy use, housing affordability and transportation. The high-tech neighbourhood will offer affordable residential and commercial developments, best-in-class technology infrastructure, and vibrant public and cultural spaces with amenities open to all.  Ultimately, it will be a place where Toronto’s celebrated diversity and inclusiveness can thrive in narrow pedestrian streets and walkways reminiscent of old Europe.

Flex space

Quayside housing

One way Sidewalk Toronto hopes to address the city’s ongoing affordability crisis is by embracing adaptable buildings and new cost-effective construction methods. According to Sidewalk Labs’ original vision laid out in its RFP, flexible lofts and modular housing will likely be the mainstay, as this approach allows for whole neighbourhoods of lower-cost, quicker-to-build housing while enabling the market to meet burgeoning demand. “If pilots around new construction methods, such as prefabricated modular or tall timber, show an ability to reduce building costs,” noted the RFP, “then developers and housing providers across Toronto will have another tool to help them meet market demand and improve affordability.”

On the mobility side, most of Quayside’s public realm will be made up of bike paths and pedestrian laneways, though the neighbourhood will likely see self-driving shuttle buses that provide point-to-point convenience rather than traditional transit vehicles. Community-building will be prioritized, with an adaptable mix of spaces and amenities that will stay active at all hours of the day. A thermal grid pilot might become the foundation of a districtwide energy system that sets a global example for climate-positive living.

“We think the eastern waterfront can feel like no other place in the world,” expressed Dan Doctoroff, CEO of Sidewalk Labs and former Deputy Mayor of New York City. “Imagine Toronto before cars ruled the city. Streets bustled with a lively mix of residents and businesses all day and night. An ever-changing array of shopkeepers peddled their wares. Kids played safely in the streets and parks. We can reclaim that hyper-dynamic sense of community—and we can do it in a way that puts people, not technology, front-and-centre.”

New global hub

To help kick-start Sidewalk Toronto’s goal of making the eastern waterfront the global hub of urban innovation, Alphabet announced that it intends to move Google’s Canadian headquarters to Quayside, where it can tap into Toronto’s already-thriving tech scene and develop innovations that could benefit communities and neighbourhoods elsewhere.

“Successful cities around the world are wrestling with the same challenges of growth, from rising costs of living that price out the middle class, to congestion and ever-longer commutes, to the challenges of climate change,” said Doctoroff. “Sidewalk Labs scoured the globe for the perfect place to create a district focused on solutions to these pressing challenges, and we found it on Toronto’s eastern waterfront. This will not be a place where we deploy technology for its own sake, but rather one where we use emerging digital tools and the latest in urban design to solve big urban challenges in ways that we hope will inspire cities around the world.”

And if the RFP provides a good indication of what Quayside might achieve, becoming a place where the physical and the digital converge into a platform for urban innovation, then catalyzing an industry won’t be so far-fetched. “Just as Silicon Valley is the centre for digital technology and New York is the centre for finance, the eastern waterfront can help make Toronto the global hub for urban innovation.”

As a neighbourhood built from the internet up, Quayside will strive to combine the advantages of a global city with a close-knit community. It will leverage innovation to achieve the benefits of urban density and vibrancy without the negative frictions that traditionally come with urban growth, (i.e. traffic congestion, elevated housing costs and environmental impacts). And best of all, in keeping with Toronto’s heritage, it will be a complete community: socially and economically diverse, radically mixed-use, yet empowered by technology in such a way that can only make the city better.

To find out more about Sidewalk Toronto and the new Quayside development, and to take part in the ongoing public conversation, please visit: sidewalktoronto.ca